DS80BV Roll Bender


The Tauring DS80BV is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  • 7.7 R.P.M.
  • 60mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the BV Control (Entry-Level)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 6.3" Standard Shaft Working Length
  • Weighs Approximately 2,250 lbs.
  • Machine Dimensions: 41" x 59" x 67"
 

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DS80BV comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 7.7 R.P.M.


standard Capacities:

  • Pipe: 3" Sch. 40 Pipe (3.50" O.D.)

  • Rectangular Tube (Easy Way): 5" x 1.5" x .20" with a 40" Minimum Radius
  • Solid Square: 2.25" x 2.25" with a 16" Minimum Radius
  • Angle (Leg-In): 3.25" x .25" with a 24" Minimum Radius
  • Flat Bar (Hard Way): 3.75" x 0.75" with a 28" Minimum Radius
  • C-Channel (Hard Way): 6" x 2" x 0.25" with a 14" Minimum Radius
  • T-Channel (Hard Way): 4.5" x 2.75" x 0.25" with a 18" Minimum Radius
  • Round Tube: 4" x .125" with a 40" Minimum Radius

  • Solid Round: 2.50" with a 16" Minimum Radius
  • Square Tube: 3.75" x .150" with a 40" Minimum Radius
  • Angle (Leg-Out): 3.25" x .25" with a 24" Minimum Radius
  • Flat Bar (Easy Way): 5.5" x 1" with a 16" Minimum Radius
  • C-Channel (Easy Way): 6" x 2" x 0.25" with a 14" Minimum Radius
  • T-Channel (Easy Way): 4.5" x 2.75" with a .25" Minimum Radius

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


REQUEST QUOTE FOR THE DS80BV

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano