DS60CN PLUS Roll Bender


The Tauring DS60CN PLUS is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  • 8 / 16 R.P.M. (2 Speed)
  • 50mm (2") Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (Programmable NC Control)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 4.5" Standard Shaft Working Length
  • Weighs Approximately 1,250 lbs.
  • Machine Dimensions: 26" x 53" x 59"
 

The SAF DS60CN PLUS model is a pyramid style bender, ideal for a wide variety of bending. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The SAF DS60CN PLUS comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a dual speed motor rated at 8 R.P.M. & 16 R.P.M.


standard Capacities:

  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)

  • Rectangular Tube (Easy Way): 3" x 1.50" x .120" with a 36" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius
  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius
  • C-Channel (Hard Way): 2.50" x 1" with a 24" Minimum Radius
  • T-Channel (Hard Way): 3" x .375" with a 18" Minimum Radius
  • Round Tube: 3" x .090" with a 56" Minimum Radius

  • Solid Round: 2" with a 36" Minimum Radius
  • Square Tube: 2" x .120" with a 36" Minimum Radius
  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius
  • C-Channel (Easy Way): 2.50" x 1" with a 24" Minimum Radius
  • T-Channel (Easy Way): 3" x .375" with a 18" Minimum Radius

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


TAURING CNC-C, NC CONTROL

The CNC-C is an NC Control that gives you the ability to store up to 20 programs, with up to 30 steps in each program. 

CNC-C Features:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

The videos below show the power and versatility of the DS60 Series Benders. 


REQUEST QUOTE FOR THE DS60CN PLUS

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano