DS50BV Roll Bender


The Tauring DS50BV is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  • 9 R.P.M.
  • 40mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the BV Control (Entry-Level)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 3.7" Standard Shaft Working Length
  • Weighs Approximately 760 lbs.
  • Machine Dimensions: 25" x 51" x 47"
 

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DS50BV comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 9 R.P.M.


standard Capacities:

  • Pipe: 1-1/2" Sch. 40 Pipe (1.90" O.D.) with a 12" Minimum Radius

  • Rectangular Tube (Easy Way): 2.3" x 1.5" x .15" with a 40" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 20" Minimum Radius
  • Angle (Leg-In): 2" x 2" with a 30" Minimum Radius
  • Flat Bar (Hard Way): 2.3" x 0.78" with a 28" Minimum Radius
  • T-Channel (Hard Way): 1.9" x 1.9" with a 20" Minimum Radius
  • Round Tube: 2.5" x .080 with a 32" Minimum Radius

  • Solid Round: 1.75" with a 24" Minimum Radius
  • Square Tube: 2" x .120" with a 40" Minimum Radius
  • Angle (Leg-Out): 2" x 2" with a 30" Minimum Radius
  • Flat Bar (Easy Way): 2.3" x 1" with a 16" Minimum Radius
  • T-Channel (Easy Way): 2" x 2" with a 20" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


The video below shows the power and versatility of the DS50 Series Benders. 

 
 

REQUEST QUOTE FOR THE DS50BV

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano