DS200HP Roll Bender


The Tauring DS200HP is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  • 150mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the HP Control (Entry-Level)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 15.7" Standard Shaft Working Length
  • Weighs Approximately 22,000 lbs.
  • Machine Dimensions: 87" x 137" x 77"
DS200 with No Background.jpg
 

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DS200HP comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 8 R.P.M.


standard Capacities:

  • Rectangular Tube (Easy Way): 11.8" x 7.8” x 0.47" with a 236" Minimum Radius
  • Angle (Leg-In): 7.8" x 7.8" x 0.78" with a 118" Minimum Radius
  • Flat Bar (Hard Way): 9.8" x 1.9” with a 78" Minimum Radius
  • Round Tube: 10.7" x 0.39" with a 197" Minimum Radius

  • Square Tube: 7.8" x 7.8" x 0.47" with a 236" Minimum Radius
  • Angle (Leg-Out): 7.8" x 7.8" x 0.78" with a 118" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


TAURING HP PLC CONTROL PANEL

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


THE VIDEOs BELOW SHOWs THE POWER AND VERSATILITY OF THE DS200 SERIES BENDERS. 


REQUEST QUOTE FOR THE DS200HP

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 5" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano