Delta 80 PQI Roll Bender


The Tauring DELTA 80 PQI is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  •  9.5 R.P.M.
  • 80mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring HP PLC Control
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 8.6" Standard Shaft Working Length
  • Weighs Approximately 3,800 lbs.
  • Machine Dimensions: 41" x 74" x 60"
 

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DELTA 80 PQI comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 9.5 R.P.M.


standard Capacities:

  • Pipe: 3.50" Sch. 40 Pipe (4.0" O.D.) with a 48" Minimum Radius

  • Rectangular Tube (Easy Way): 4.25" x 2.8” x .175" with a 60" Minimum Radius
  • Solid Square: 2.50" with a 29" Minimum Radius
  • Angle (Leg-In): 3.5" x 3.5" x .35" with a 76" Minimum Radius
  • Flat Bar (Hard Way): 4.25" x .70” with a 52" Minimum Radius
  • T-Channel (Hard Way): 3.15" x 3.15” x .35" with a 45" Minimum Radius
  • Round Tube: 4.25" x .10” with a 115" Minimum Radius

  • Solid Round: 2.8”” with a 64" Minimum Radius
  • Square Tube: 3.50” x 3.50" x .25" with a 100" Minimum Radius
  • Angle (Leg-Out): 3.5" x 3.5" x .35" with a 76" Minimum Radius
  • Flat Bar (Easy Way): 7" x .10” with a 40" Minimum Radius
  • T-Channel (Easy Way): 3.15" x 3.15” x .35" with a 45" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


TAURING HP PLC CONTROL PANEL

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


REQUEST QUOTE FOR THE Delta 80 PQI

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano