Delta 60 CNC-C Roll Bender


The Tauring DELTA 60 CNC-C is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  •  7.7 R.P.M.
  • 60mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (Programmable NC Control)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 6.3" Standard Shaft Working Length
  • Weighs Approximately 2,300 lbs.
  • Machine Dimensions: 45" x 59" x 67"
 

Pyramid Style, three gear driven Roll Bender. Lower roll centers can be positioned in four different positions (280mm, 330mm, 380mm or 430mm center distances). All three shafts are hardened, ground high strength steel, which are mounted on taper roller bearings for high radial or axial loads. The top roll is equipped with a friction mechanical device for rim speed compensation. The frame is made out of rugged steel. The Delta 60 comes with a self-braking motor and is in conformity with “CE” Regulations (89/392 CE). Electromagnetic compatibility, (89/336) Low tension (73/23,93/68).


Standard Capacities:

  • Pipe: 2.50" Sch. 40 Pipe (2.875" O.D.) with a 27" Minimum Radius

  • Rectangular Tube (Easy Way): 4.25" x 2.125” x .14" with a 45" Minimum Radius
  • Solid Square: 2.125" x 2.125” with a 21" Minimum Radius
  • Angle (Leg-In): 3.15" x 3.15" x .315" with a 37" Minimum Radius
  • Flat Bar (Hard Way): 3.5" x .70” with a 37" Minimum Radius
  • T-Channel (Hard Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius
  • Round Tube: 3.5" x .10” with a 45" Minimum Radius

  • Solid Round: 2.5” with a 21" Minimum Radius
  • Square Tube: 3.15” x 3.15" x .140" with a 45" Minimum Radius
  • Angle (Leg-Out): 3.15" x 3.15" x .315" with a 29" Minimum Radius
  • Flat Bar (Easy Way): 5.25" x 1.4” with a 25" Minimum Radius
  • T-Channel (Easy Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


TAURING CNC-C, NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

THE VIDEOS BELOW SHOWS THE POWER AND VERSATILITY OF THE Delta 60 SERIES BENDERS.

 
 

REQUEST QUOTE FOR THE Delta 60 cnc-c

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano