Delta 60 CNC-2 Roll Bender
The Tauring DELTA 60 CNC-2 is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.
- 3 Driving Rolls
- 7.7 R.P.M.
- 60mm Shaft Diameters
- High-Quality, Italian Build
- Equipped with the Tauring CNC-2 (Touchscreen NC Control)
- LED Display for Digital Readout of Top Roll Position
- Includes Interchangeable Universal Tooling
- 6.3" Standard Shaft Working Length
- Weighs Approximately 2,300 lbs.
- Machine Dimensions: 45" x 59" x 67"
Pyramid Style, three gear driven Roll Bender. Lower roll centers can be positioned in four different positions (280mm, 330mm, 380mm or 430mm center distances). All three shafts are hardened, ground high strength steel, which are mounted on taper roller bearings for high radial or axial loads. The top roll is equipped with a friction mechanical device for rim speed compensation. The frame is made out of rugged steel. The Delta60 comes with a self-braking motor and is in conformity with “CE” Regulations (89/392 CE). Electromagnetic compatibility, (89/336) Low tension (73/23,93/68).
Pipe: 2.50" Sch. 40 Pipe (2.875" O.D.) with a 27" Minimum Radius
- Rectangular Tube (Easy Way): 4.25" x 2.125” x .14" with a 45" Minimum Radius
- Solid Square: 2.125" x 2.125” with a 21" Minimum Radius
- Angle (Leg-In): 3.15" x 3.15" x .315" with a 37" Minimum Radius
- Flat Bar (Hard Way): 3.5" x .70” with a 37" Minimum Radius
- T-Channel (Hard Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius
Round Tube: 3.5" x .10” with a 45" Minimum Radius
- Solid Round: 2.5” with a 21" Minimum Radius
- Square Tube: 3.15” x 3.15" x .140" with a 45" Minimum Radius
- Angle (Leg-Out): 3.15" x 3.15" x .315" with a 29" Minimum Radius
- Flat Bar (Easy Way): 5.25" x 1.4” with a 25" Minimum Radius
- T-Channel (Easy Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius
(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)
THE CNC-2: NC TOUCHSCREEN CONTROL
• Numerical Control on wheel-mounted console.
• Joystick grip for axis movement command.
• Double command pedals for the right and left rotation.
• Emergency button for mechanical stop.
• Locked compartment for ARC Meter, pen drive, instruction manual.
• 10” LCD colors monitor LCD touch screen.
• N ° 200 storable programs, each with up to 250 steps.
• N ° 50 Storable Profiles.
• Automatic FIT calculation (Profile Accuracy).
• N° 20 Speed Set for Each Axis.
• Positioning accuracy 50 µm.
PROPRIETARY SOFTWARE & GRAPHIC INTERFACE:
• Completely made according to Tauring specifics.
• Simple and intuitive, with the main controls at users’ disposal thank to its touchscreen 10”.
INDEPENDENT AXIS REGULATION:
Each bending axis can be managed in a completely independent way. The user can have at his disposal up to 20 different speeds per each axis.
It is possible to insert the significant data of each profile, so as to create a characteristic bent that allows to directly set up the desired bending radii.
INTUITIVE AND SIMPLIFIED PROGRAMMING:
Of every shape or bending radius, thanks to the direct insert of material development and bending radii. The adjustable speeds allow the user to manage in an easy way the joints between straight and bent parts or between different bending radii.
MACRO FOR PREDETERMINED SHAPES:
The users have at their disposal many pre-programmed macro, in order to simplify the creation of the most common shapes, like pointed arch, spiral, Mediterranean arch and many others. By inserting few simple data. The users can quickly realize complete programs for bending many different shapes.