Delta 100 CNC-C Roll Bender


The Tauring Delta 100 cnc-C is a pyramid-style, HYDRAULIC ROLL bender, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  • 5 R.P.M. 
  • 100mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (NC Control)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 10.2" Standard Shaft Working Length
  • Weighs Approximately 5,900 lbs.
  • Machine Dimensions: 71" x 73" x 85"
 

The DELTA 100 CNC-C model is a pyramid style bender, ideal for a wide variety of bending. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The DELTA 100 CNC-C comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a motor rated at 5 R.P.M. 


standard Capacities:

  • Pipe: 4" Sch. 40 Pipe (4.5" O.D.) with a Min. Radius of 52"

  • Rectangular Tube (Easy Way): 5.3" x 3.5” x .28" with a Min. Radius of 76”
  • Solid Square: 2.80" with a Min. Radius of 33"
  • Angle (Leg-In): 4.25" x 4.25" x .45" with a Min. Radius of 104"
  • Flat Bar (Hard Way): 5.6" x .70” with a Min. Radius of 37"
  • T-Channel (Hard Way): 4.25" x 4.25” x .45" with a Min. Radius of 64"
  • Round Tube: 5" x .125” with a Min. Radius of 182"

  • Solid Round: 3.15” - with a Min. Radius of 56"
  • Square Tube: 4.25” x 4.25" x .175" with a Min. Radius of 84”
  • Angle (Leg-Out): 4.25" x 4.25" x .45" with a Min. Radius of 84"
  • Flat Bar (Easy Way): 8.85" x 1.40” with a Min. Radius of 33"
  • T-Channel (Easy Way): 4.25" x 4.25” x .45" with a Min. Radius of 64"

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


THE TAURING CNC-C, NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

REQUEST QUOTE FOR THE Delta 100 CNC-C

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano