ALPHA 80 CNC-C Roll Bender


The Tauring alpha 80 cnc-C is a pyramid-style, HYDRAULIC ROLL bender WITH RECTILINEAR GUIDED BOTTOM ROLLS, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  •  7.5 R.P.M.
  • 60MM Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (NC Control)
  • Includes Interchangeable Universal Tooling
  • 6.3" Standard Shaft Working Length
  • Weighs Approximately 2,870 lbs.
  • Machine Dimensions: 38" x 49" x 57"

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring ALPHA 80 CNC-4 comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 7.5 R.P.M.


standard Capacities:

  • Pipe: 3.5" Sch. 40 Pipe (4" O.D.) with a 35" Minimum Radius

  • Rectangular Tube (Easy Way): 4.7" x 2.3" x 0.15" with a 39" Minimum Radius
  • Solid Square: 2" with a 16"" Minimum Radius
  • Angle (Leg-In): 3.5" x 3.5" x 0.35" with a 31" Minimum Radius
  • Flat Bar (Hard Way): 3.9" x 0.78" with a 27" Minimum Radius
  • Round Tube: 3.9" x 0.11" with a 70" Minimum Radius

  • Solid Round: 2.3" with a 15.7" Minimum Radius
  • Square Tube: 3.5" x 3.5" x 0.15" with a 39" Minimum Radius
  • Angle (Leg-Out): 3.5" x 3.5" x 0.35" with a 23" Minimum Radius
  • Flat Bar (Easy Way): 5.9" x 1.3" with a 15.7" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


THE TAURING CNC-C: NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

THE VIDEO BELOW SHOWS THE POWER AND VERSATILITY OF THE ALPHA 80 SERIES BENDERS.

 
 

REQUEST QUOTE FOR THE ALPHA 80 CNC-C

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano