ALPHA 40 H2 Roll Bender


The Tauring alpha 40 H2 is a pyramid-style, HYDRAULIC ROLL bender WITH RECTILINEAR GUIDED BOTTOM ROLLS, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  •  7.7 R.P.M.
  • 40mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring H2 Control
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 3.7" Standard Shaft Working Length
  • Weighs Approximately 1,200 lbs.
  • Machine Dimensions: 24" x 37" x 40"

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring ALPHA 40 H2 comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 7.7 R.P.M.

standard Capacities:

  • Pipe: 1" Sch. 40 Pipe (1.315" O.D.) with a 16" Minimum Radius

  • Rectangular Tube (Easy Way): 2.25" x 1.1” x .090" with a 45" Minimum Radius
  • Solid Square: 1.1" x 1.1” with a 27" Minimum Radius
  • Angle (Leg-In): 1.75" x 1.75" x .180" with a 29" Minimum Radius
  • Flat Bar (Hard Way): 1.75" x .375” with a 15" Minimum Radius
  • Round Tube: 2.25" x .075” with a 33" Minimum Radius

  • Solid Round: 1.15" with a 15" Minimum Radius
  • Square Tube: 1.75” x 1.75" x .090" with a 42" Minimum Radius
  • Angle (Leg-Out): 1.75" x 1.75" x .250" with a 24" Minimum Radius
  • Flat Bar (Easy Way): 2.25" x .75” with a 14" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


H - H2.png

H2 Features:
- Push buttons to control Hydraulic Left Bottom Roll and Hydraulic Right Bottom Roll.
- Foot pedals to control the feeding of the material. (Forward and Reverse)
- Safety Stop mounted directly under push buttons.
- Handles for easy movement.

The video below showS the power and versatility of the ALPHA 40 Series Benders. 


Name *
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano