ALPHA 100 H2 Roll Bender


The Tauring alpha 100 H2 is a pyramid-style, HYDRAULIC ROLL bender WITH RECTILINEAR GUIDED BOTTOM ROLLS, ideal for BENDING A wide variety of APPLICATIONS.

STANDARD Features:

  • 3 Driving Rolls
  •  6 R.P.M.
  • 80MM Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring H2 Control
  • Includes Interchangeable Universal Tooling
  • 8.6" Standard Shaft Working Length
  • Weighs Approximately 4,400 lbs.
  • Machine Dimensions: 45" x 57" x 61"

The TAURING ALPHA 100 H2 emerges away from the bending machines that are presently in the market, thanks to the new Rectilinear Guides Construction System that guarantees more rigidity and stiffness to the entire machine. This allows for more precise positioning and improves a lot of the bending conditions in respect to the classical orbital machines, that are still present today in the market. The profiles that can be bent are more numerous, obtaining bending results unthinkable until very recently.


standard Capacities:

  • Pipe: 3.5" Sch. 40 Pipe (4" O.D.) with a 48" Minimum Radius

  • Rectangular Tube (Easy Way): 4.25" x 2.8” x .175" with a 60" Minimum Radius
  • Solid Square: 2.50" with a 29"" Minimum Radius
  • Angle (Leg-In): 3.5" x 3.5" x .35" with a 76" Minimum Radius
  • Flat Bar (Hard Way): 4.25" x .70” with a 52" Minimum Radius
  • Round Tube: 4.25" x .10” with a 115" Minimum Radius

  • Solid Round: 2.8” with a 100" Minimum Radius
  • Square Tube: 3.50” x 3.50" x .25" with a 100" Minimum Radius
  • Angle (Leg-Out): 3.5" x 3.5" x .35" with a 76" Minimum Radius
  • Flat Bar (Easy Way): 7" x .10” with a 40" Minimum Radius

(PLEASE NOTE – THe minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)


the TAURING H2 CONTROL

H2 Features:
- Push buttons to control Hydraulic Left Bottom Roll and Hydraulic Right Bottom Roll.
- Foot pedals to control the feeding of the material. (Forward and Reverse)
- Safety Stop mounted directly under push buttons.
- Handles for easy movement.

THE VIDEOS BELOW SHOWS THE POWER AND VERSATILITY OF THE ALPha 100 SERIES BENDERS.


REQUEST QUOTE FOR THE ALPHA 100 H2

Name *
Name
Phone (Your Direct Line) *
Phone (Your Direct Line)
(If known, what grade will the material be rated at?)
(I.e.: We are looking for a Roll Bender capable of bending 2" Sch. 40 Pipe, A36 Mild Steel, to a 49" radius, etc.)
Albert Solano